Bioresonance Device Property

CONTENT

• Introduction
• Product Features
• Technical Specification
• Safety Instructions
• Instalation
• Important Recommendations
• Guaranty Terms
• Care of Device
• Contact HBD

INTRODUCTION

• The Energy Scan QCXI 2000 device is designed for stress detection and stress reduction. The devise does not diagnose anyone, only a licensed practitioner can diagnose a patient. This system is calibrated to measure the very fine and subtle electrical and subspace reactions to a group of biological and medical substances. The sensitivity is set so fine so as to pick up the earliest signs of disease and distress.

• This device is designed for use as Biofeedback and TENS. The definition of Biofeedback is "measuring a physiological response and feeding it back to the patient".

• TENS is Transcutaneous Electro Nerval Stimulation. This system measures evoked potential reactions of the patient to applied stimulation's. This is evoked potential Biofeedback. This device catalogues and tabulates the complex evoked potential Electro Physiological Reactions of your patient. This is the EPR pattern. The accuracy of the EPR pattern is limited and as such the results can not be treated as completely diagnostic. This device is not diagnostic, the readings are meant as pre diagnostic.

• The trivector pattern is comprised of the three major co-factors of all electromagnetic phenomena. These are the amps, volts, and resistance; or conductance, capacitance, and inductance. Together they make a factor known as reactance. Electro Physiological Reactance (EPR) is a measurable factor in medicine that can indicate many aspects of the quality of a patient's health. The fact that EPR happens at the ionic rate means that our EPR test can be done at centisec speeds. Only a computer can calculate the vast quantities of information. In the calibration process of our EPR test, we test the EPR of the patient to 20 samples of a low reactive distilled water and samples of toxic sugar and insecticide the highest known reactive substance known.

• If the patient reacts to the toxic reactive materials significantly then the test can proceed. If the reactance is not significant then the computer will alter the test time or sensitivity till the calibration test shown to be significant. Then the test can proceed.

• During the large xrroid test over 65,000,000 bits of data are developed and analyzed. This is far beyond human abilities to calculate quickly and would take too much graphic space to display it. But the end result of the reactance matrix process during the calibration test is worth displaying for your visual satisfaction.

• The doctor or practitioner then should use this data wisely and challenge the results with more standard medical measures, some are found in the disease dictionary. This device is safe and no risk to your patient. The potential benefits are amazing.

• The Energy Scan QCXI 2000 System is a computer operated energetic medicine interface that is so sophisticated most of its' functions are automatic. The auto focus system uses a link of therapy to test that is self-correcting and self-adjusting. The system can make corrections at speeds over one hundredth of a second.

• This is a sophisticated program designed to help medical diagnosis and therapy. The software makes an electrical and subspace connection through the parallel port of your computer or through the subspace link of the trinary software.

(back)

PRODUCT FEATURES

(back)

TECHNICAL SPECIFICATION

 Model: Energy Scan QXCI 2000

Potencial: 6.5 W

Eletrical Current: 0.12 A

Resistence: 54.166 W

Capacitance: 0.78F

Frequency: 50/60Hz

Control System: Automatic

Weigh: 500g

Dimensions: 070 X 140 X 180 mm

Cables: Computer/Device Connection: Parallel Connector Cable

(back)

SAFETY INSTRUCTIONS

(back)

INSTALATION

• Place four 1,6V rechargeable batteries in Device (see Product Feature - Inferior View of the Device).
• Make sure specifications of computer match device requirements.
• Insert Parallel Connector Cable into Printer Port of the computer.
• Insert head band cable into head port of Device.
• Insert wrist and shinband cable into limb port of Device.
• Phone contact person to install the program.
• Once the program has been successfully installed, follow Start up Help Manual and Device Manual to operate Device.

(back)

IMPORTANT RECOMMENDATIONS

• DO NOT apply over broken skin.
• DO NOT use on patients with pacemakers
• DO NOT use on patients with extreme electrical allergy
• DO NOT use on anyone in the early stage of pregnancy
• BE CAUTIONS with patients who have had electroshock therapy
• Wipe and clean the harness after each use (alcohol is preferable)
• Surrogate testing can be done on infants with the harness connected to the mother and the child in the mothers arms
• DO NOT try open or tamper the Device Box

(back)

GUARANTY TERMS

This product is guaranteed for twelve months from the date of original purchase. Any defect that arise due to faulty material or workmanship will be repaired free charge during this period by the dealer from whom you purchase the unit. The guarantee is subject to the following provisions:

• The guarantee is only valid within the boundaries of the country of purchase.
• The product must be correctly installed and operated in accordance with the instructions contained in this manual.
• It must be used solely for medical purposes.
• The guarantee does not cover accidental damage, misuse or consumable items such as batteries.
• The guarantee will be rendered invalid if the product is resold or has been damaged by inexpert repair.
• The manufacturer disclaims any liability for incidental or consequential damages.
• The guarantee is in addition to and does not diminish your statutory or legal

(back)

CARE OF DEVICE

• Clean tray with alcohol only if cleaning is necessary.
• Clean connect points or bands with alcohol only if cleaning is necessary.
• Use rechargeable batteries. (se Product Feature - inferior View of the Device)
• Do not remove or reinsert Limbs/Head cable into Device unnecessarily to help reduce chance of wear and tear of breakage.

(back)

CONTACT HBD

Healing Bio Dynamics

22 A The Avenue

London

NW6 7YD

Phone/Fax: +44 (181) 357 6809

E-mail: healingbiodynamics@hotmail.com

(back)

Return to main page