Here the computer will develop a handshake with the patient to maximize the reactivity scores. The computer will measure the trivector reactions of the patient to establish a link to the patient with resistance, voltage, and amperage. This is a connection for conductance, capacitance, and inductance for magnetic, static, and resistance link up.

The computer will adjust reaction timing, frequency interaction, and the trivector interaction. This handshake allows for the Autofocus capacities of this medical device. The 'Virtual All' button will disable the electrical harness and enable virtual subspace link. The 'Electrical Test Reset' will turn back on the harness.

To check for geopathic stress in the room, click the "Computer Risk Field Neutral" button. Then you can enable or disable the risk field of your CPU. The Central Processing Unit (CPU) of any computer operates with a variety of electromagnetic signals. The CPU sends out a wide variety of electromagnetic waves. Many of these waves are harmful to you and your family. The neutralization program will develop a neutralization of the harmful waves while not disturbing your computer.

The device can also develop a subspace protection in your CPU as well. Also we can use the CPU to produce a constant Schuman type wave to surround the computer with a three to four foot area of a health stimulating Bio-field.

There is a natural Low Frequency Field that permeates the world. This has been called the Schuman field after its discoverer. This field seems to be stimulating to health of organisms like humans. By using the computer to develop this waveform of ELF nature, we can stimulate the health of the user of this computer and the patient being treated. Sensitive people can feel this field and it's effects.

Thus this computer can produce a ELF health field from it's CPU, a healing sound and magnetic treatment from the CD, and 8 different energetic treatments from the harness.

Resulting in over 12 different treatments locked in a cybernetic loop for autofocus treatments of the patients. The finest technology in energetic medicine is at you disposal.

The operation of this field generator might be too complicated for some slow computers or computers with CPU defects. If the operation of the field generator interferes with your program click the 'Deactivate Schuman' box in Calibrate screen. Then the system will not operate until 'Activate Schuman' is clicked, after which the Schuman field will turn on automatically, until 'Deactivate' is clicked.

To initiate the calibration handshake click on the resistance click button or strike the 'R' key. The computer must leave windows by interrupting it and the testing takes place in assembly language. This interrupt is small in duration [approximately 8 seconds]. By using the down arrow you can move to the next three tests. These four tests must be done to proceed.

The computer will now advice as to the success of the calibration. If successful the resistance words will appear in red. If unsuccessful, then click on the capacitance button.

Then return to the resistance if it is not in red. The interrupt will occur after each test for some seconds till the calibration is complete. Proceed to the magnetic calibration next and click onto it. If the resistance is still not red then try again now.

The patient's relaxation determines the resistance calibration, so progressive relaxation can improve the calibration. Then click the Total integration switch. The computer can now detect some polarity irregularities and will reveal them in the upper panel. These geopathic stress patterns can be corrected temporarily by using the 'Correct Geopathic Anomalies' button that appears after Adjust Calibration. This procedure will necessitate activating the Start button 3 or 4 times.

If all attempts have failed for calibration then click on the search and clear anomalies button. A search cartoon reflects the computer searching and clearing the electrical pattern anomalies and deepening the handshake. The computer will try to correct all of the problems and estimate the percentage of calibration. If the percentage is below 85% then click on the Adjustment button for forced calibration. The test will have to be done in the next 10 min. The calibration handshake is now complete. Exit the calibration with close. This returns us to the main menu. Now the Test button is enabled.

Click it. At times the program will warn you about the harness not being properly attached.

Just click 'OK' or enter if all is well. After clicking on the Searching and Adjustment buttons you will be given a button to fix all geopathic stress. Click and follow instructions. Be sure to watch all label instructions. Sometimes they will tell you to recalculate. Sometimes the system will not be able to calibrate and then your test results will be unreliable but you can still do therapy. If there is difficulty in the calibration just repeat the process; hit 'R' then down arrows. The Trivector pattern is comprised of the three major co-factors of all Electromagnetic phenomena. These are the amps, volts, and resistance. or conductance, capacitance, and inductance. Together they make a factor known as reactance. Electro Physiological Reactance (EPR) is a measurable factor in medicine that can indicate many aspects of the quality of a patients' health. The fact that EPR happens at the ionic rate means that our EPR test can be done at centisec speeds. Only a computer can calculate the vast quantities of information. In the calibration process of our EPR test, We test the EPR of the patient to 20 samples of low reactive distilled water and samples of toxic sugar and insecticide the highest known reactive substance known. If the patient reacts to the toxic reactive materials significantly then the test can proceed. If the reactance is not significant then the computer will alter the test time or sensitivity till the calibration test is shown to be significant. Then the test can proceed. During the large Xrroid test over 65,000,000 bits of data are developed and analyzed. This is far beyond human abilities to calculate quickly and it would take too much graphic space to display it. But the end results of the reactance matrix processed during the Calibration test is worth displaying for your visual satisfaction. So contained on the Mathematics button are two screens that display the end results of 1.75 million bits of data done in the Calibration of this patient.

In the 'Computer Risk Field Neutralization' panel we can check the room for geopathic stress, clear it, or check our CPU. We can generate neutralizing fields with our CPU to correct geopathic stress or convert our computer to send out a Schulman wave. The Central Processing Unit or CPU of your computer emits some harmful electromagnetic radiation EMR. These radiations can weaken the body. This program will sense these frequencies patterns and nullify them with inverse patterns thus producing a null field without interfering with your computer operations in any fashion.

To activate this permanently simply access this panel in the Calibration screen. It will then activate the system whenever you enter CLASP and remain on till you turn off your computer. You need only activate the program once. A recalibration process is used on every operation to continue to keep a proper calibration mode.